Home > Cold Steels Plates>>p355nl2 pressure vessel steel

Send Email

p355nl2 pressure vessel steel

Related Product

  • P355NH, P355NL1, P355NL2 Pressure Vessel Steel plate

    P355NH, NL1 & NL2 – pressure vessel steels used by the worlds leading fabricators supplying the oil and gas industry. A pressure vessel steel grade with good weld ability and high resistance to brittle cracking, P355NH is used by the world's fabricators for the manufacture of pressure vessel tanks for the storage of pressurized gases.

  • P355NL2,EN10028 3 Grade P355NL2,P355 NL2 STEEL PLATE

    P355NL2 steel grade is one of grade in En10028 3, which is non alloy and alloy steels with specified elevated temperature properties. P355NL2 grades are used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids.

  • P355NL2 Boiler/Pressure Vessel Steel Plates Henan HZZ Iron

    ApplicationThe grade P355NL2 is non alloy special steels. The standard specifies requirements for pressure vessels equipment made weldable fine gain steels. The standard specifies requirements for pressure vessels equipment made weldable fine gain steels.

  • P355NH Pressure Vessel Steel

    May 29, 2010 · P355NH is a pressure vessel steel grade with good weldability and high resistance to brittle cracking. It is used by the world's fabricators for the manufacture of pressure vessel tanks for the storage of pressurised gases.

  • EN10023 3 P355NL2 PRESSURE VESSEL STEEL PLATES

    en10023 3 p355nl2 pressure vessel steel plates P355NL2 to EN10028 3 is a fine grained pressure vessel steel suitable for use at low temperatures. With its fine grained and improved notch toughness it is one of the most popular steels for used in the oil and gas and petrochemical industries.

  • EN 10028 3 P355NL2 pressure vessel steel supplier

    P355NL2 steel follows the same pattern as P355NL1 steel, but is impact tested at 50 deg C. Bebon international carries a large range of pressure vessel plate stock certified to both EN 10028:3 P355NL1steel and EN 10028:3 P355NL2 steel as a professional P355NL1 steel Chinese supplier.

  • p355nl2 equivalent astm material GB/T 3077 15CrMo Steel

    CASIDER SA, Steel sheets P355NL2. Fine grained structural steel for pressure vessels. P355NL2 steel is characterised by good weldability and high resistance to brittle cracking. These types are used above all for manufacturing vessels for pressurised gas (LPG, butane and propane tanks), pressure vessels, parts for steam boilers, pressure piping, compressors, etc.

  • EN10028 3 P355NL2 steel plate SA516GR70,SA516Gr.70

    Unitedsteel Plant is committed to product and supply EN10028 3 P355NL2, P355NL2 STEEL PLATE, P355NL2 Mill Plate as well as the equivalent grades as per ASTM, ASME, JIS , EN, UNS Specs. We have about 3000tons of Pressure Vessel plates per each size in our port warehouses.

  • Pressure Vessel Steel Pressure Vessel Plate Brown Mac

    Pressure Vessel Steel Plate Pressure Vessel Plate certified to all leading European, American and British grades is available, sourced from Western European Mills with Low Sulphur & Phosphorus content, vacuum de gassed, calcium treated pressure vessel plate.

  • ASME A537 & ASTM SA537 Class 1 Brown McFarlane

    About ASME SA537 Class 1 and ASTM A537 Class 1 Pressure Vessel Steel. The A537 / SA537 standard, its full name is “Standard Specification for Pressure Vessel Plates, Heat Treated, Carbon Manganese Silicon Steel”, is intended use in the manufacture of fusion welded pressure vessels and

  • Weldable fine grain structural steels for pressure vessels

    The steel grades P275NH P355NL2 are delivered in a condition obtained by normalized rolling. The steel grades P355M P460ML2 are delivered in a thermomechanically rolled condition. The provisions of DIN EN 10028 2 and 5 shall apply for delivery and inspection.

  • P460NH|P355NL2|pressure vessel steel plate YUSHENG STEEL

    These two pressure vessel steel grades P460NH and P355NL2 both owned higher tensile and yield strength. Boiler steel . plates P460NH tensile strength is at 570_720 Mpa for thickness belows 60mm,even maximum 730 Mpa is OK for the product . thicknesses up to 16 millimeters.Pressure vessel steel plates P355NL2 tensile strength shall be within 490_630 Mpa for thickness

  • P355NL2 Boilers and Pressure Vessels steel plate Technique

    P355NL2 Boilers and Pressure Vessels steel plate is under the standard EN 10028 3,belong to weldable fine grain steels,normalezed. P355NL2 Boilers and Pressure Vessels steel plate is used in petroleum, chemical, power plants, boilers and other industries , P355NL2 steel plate also used to make reactors, heat exchangers, separators, tank, gas cans, gas cans, nuclear reactor pressure vessel, boiler drum,

  • p355nl2 equivalent astm material GB/T 3077 15CrMo Steel

    P355NL2 steel plate BEBON INTERNATIONAL. P355NL2 steel mechanical properties. A pressure vessel steel grade with good weldability and high resistance to brittle cracking, P355NL2 steel is used by the world's fabricators for the manufacture of pressure vessel tanks for

  • EN P355NL2 BEBON steel

    EN 10028 3 P355NL2 steel plate/sheet is for boilers and Pressure Vessels steels,it is a normalized steel plate and sheet which is mainly used for building pressure vessels and boilers and pipes for hot liquid.

  • Products / Pressure Vessel Steel Plate / EN 10028 3 Steel

    Home > Products > Pressure Vessel Steel Plate > EN 10028 3 Steel Plate > EN 10028 3 Grade P355NH|EN10028 P355 NH S Inventory Gangsteelis specialized in supplying EN10028 2 steel plate in grade P355NL2 P355NL2,EN10028. P460N,EN10028 3 Grade P460N,P460 N STEEL Inventory:

  • Weldable fine grain structural steels for pressure vessels

    The steel grades P275NH P355NL2 are delivered in a condition obtained by normalized rolling. The steel grades P355M P460ML2 are delivered in a thermomechanically rolled condition. The provisions of DIN EN 10028 2 and 5 shall apply for delivery and inspection.

  • Steel for Boilers and Pressure Vessels,Steel for Boilers

    The delivery condition of Boilers and Pressure Vessels Steel areNormalize, annealing,tempering,TMCP,PWHT, impact test,Q&T. The main steel grade ofPressure vessel and boiler quality steel are EN 10028 2P235 GH,P 265 GH,P 295 GH,P 296 GH,P 355 GH

OTP Services

We pride ourselves in our commitment and the level of service offered and aim to work closely with customers, to ensure we meet your expectations. Our objective is to keep your business operations running as smoothly as possible on a day-to-day basis.

[email protected]|After-sale Service|Online Service

[email protected] After-sale Service Online Service